We can make Rubber, Steel, Elastomeric Bearings Tests in accordance with Standarts.
The Team Of Experienced Engineers and Qualified Personnel provide accurate and reliable analysis results to the Customer with technological testing equipments.
All Our Devices are Periodically Calibrated with our Accredited Partner form Turkish Accreditation Agency with TS EN ISO / IEC 17025 Certificate.
All our tests are carried out in accordance with the relevant product standards.
SOME OF THE TESTS PERFORMED AT OUR CENTER
PRODUCT TESTS
ISO 6446
Rubber Products - Bridge Bearings - Specification For Rubber Materials,
EN 1337-3
Structural Bearings Part 3: Elastomeric Bearings,
EN 15129
Anti Seismic Devices,
DIN 4141
Structural Bearings,
ASTM D4014
Standart Specification For Plain and Steel-Laminated Elastomeric Bearings For Bridges.
BS 5400
AASHTO - M251
AS5100.4
Reinforced elastomeric bearings are made up of multiple laminates of elastomeric material and are equipped with steel reinforcing plates during the vulcanisation process.
The steel sheets provide the necessary stiffness in vertical direction.
There are different types of reinforced elastomeric bearings and these types are classified as Type A, B, C, D, E and F in the EN 1337-3 and all types are manufactured in our factory.
Table 2 and 3 present the standart sizes for bearings type B according to EN 13337-3.
Vertical loading capacity, rotational capacity and horizontal displacement capacity of the bearing are calculated according to EN 1337-3.
However it should be mentioned taht for a specific project, different size and shapes of elastomeric bearings can be designed and maufactured in our factory.
Different tests on elastomeric bearings can be conducted such as;
- Shear modulus test (at nominal, low and very low temperature)
- Shear modulus after aging
- Shear bond strength test (at ambient and after aging condition)
- Compression test
- Resistance to ozone test
